Shower Repair

Shower Valve Replacement in Bellevue: A New Posi-Temp Valve in an Open Condo Wall

Nov 19, 2026
Shower Valve Replacement in Bellevue: A New Posi-Temp Valve in an Open Condo Wall

A condo owner near Crossroads in Bellevue was remodeling a tub-shower and wanted the old shower valve replaced while the wall was open. In September, after the remodel crew had finished demolition, Caleb replaced it with a new Moen Posi-Temp pressure-balancing valve in a single four-hour visit.

What We Found

The job was quoted before demolition, so nobody could see the piping yet. The estimate said what it assumed: copper supply lines in good enough shape to connect to, a unit that could be isolated on its own without a building-wide shutdown, and a valve that would not need major relocation. With the wall open, Caleb could check each of those before he cut anything, and the job went ahead as quoted.

What We Did

With the unit's water off, Caleb disconnected and removed the old shower valve, set a new Moen Posi-Temp valve in the wall and secured it at the right depth for the finished wall that the tile would create. He reconnected it to the existing hot and cold supplies and to the shower outlet piping, then pressure-tested the new connections and checked for leaks while everything was still visible. The handle, escutcheon, shower arm and head go on at trim-out, after the tile and waterproofing are done.

A new shower valve with a green plaster guard mounted between the studs above the tub, copper supply lines running up the wall and a white toilet to the right
The new Posi-Temp valve set in the wall at finished-wall depth, ready for the tile.

The valve, the rough-in and the trim-out were quoted together, and the job came to about $2,740 with tax.

Why It Matters

  • Replace the valve while the wall is open. A remodel is the cheapest moment to change a shower valve. Once new tile is up, the next valve replacement means cutting into it.
  • Pressure balance protects the person in the shower. A Posi-Temp valve holds the water temperature steady when someone flushes a toilet or starts a dishwasher, so the shower does not suddenly run scalding or cold.
  • Depth matters. A valve set too deep or too shallow for the finished wall leaves trim that will not seat. It gets set to the planned tile thickness, not to the bare studs.
  • Test before the wall closes. A leak found on test costs a fitting. A leak found behind new tile costs the tile.

Why Crossroads

Crossroads is one of Bellevue's denser neighborhoods, with condominium and apartment buildings around the shopping center, many of them old enough to be on a second bathroom remodel. A condo remodel brings a question a house never does: can one unit's water be shut off without shutting off its neighbors? Planning for that, and for the building's rules on work hours and water shutdowns, is part of quoting the job. Crossroads is about 30 minutes from our Fall City shop, and we work across Bellevue, from Lake Hills to the condos near downtown.

Planning a Bathroom Remodel

Call 425-549-2400 or schedule an appointment.

More: bathroom and kitchen remodel plumbing · a Posi-Temp valve replacement in Woodinville · plumbing in Bellevue · faucet services · a water heater installation in Bellevue

Need Professional Plumbing Services?

Contact us today for expert plumbing solutions you can trust.

425-549-2400Get Online Quote