Toilet Installation in Duvall, WA

New Toilets, Shutoffs and Customer-Supplied Installs

Lighthouse Plumbing replaces and installs toilets across Duvall, from the houses near Main Street to the newer homes up the hill. We supply Toto Drakes and American Standard Cadet Pros, or set the toilets you've bought, on a new wax ring, bolts and supply line, and we swap old multi-turn shutoffs for quarter-turn valves while the water is off. The old toilets leave with us.

A new white Toto two-piece toilet with an elongated seat against a dark grey wall, a plunger on the left and a glass bathroom scale on the beige tile floor
One of three new Toto Drakes PJ and Alexander installed in a Duvall house in August 2026, each on a new quarter-turn shutoff.

Recent Toilet Work in Duvall

In August, PJ and Alexander replaced all three toilets in a Duvall house. They shut off the main, drained the system, pulled the three old toilets and the three multi-turn angle stops behind them, and fitted quarter-turn ball valve stops on the existing CPVC water lines. Two of the new toilets are elongated, comfort-height Toto Drakes. The third bathroom has a 10-inch rough-in, closer to the wall than the usual 12, so it got a round-front Toto Drake made for that spacing. Each went down on a new wax seal and closet bolts with a new supply line, was tested, and was caulked at the base.

The old white toilet in the same bathroom before replacement, its tank lid off and the inside of the tank visible, a plunger to the left
Before: one of the three old toilets in the same Duvall house, lid off, before the water went off at the main.

In May, Donald was at another house in town for two toilets the homeowner had already bought: one-piece Kohlers for the two upstairs bathrooms. He pulled the two old toilets and hauled them away, set the new Kohlers and tested both with no leaks. Setting toilets you've chosen yourself is a shorter, simpler job than supplying them, and it is priced that way.

An older almond toilet in a small upstairs bathroom before replacement, a pair of channel-lock pliers on the floor beside it
Before: one of the two old upstairs toilets Donald replaced in May.
A new white toilet with an elongated seat set against a white wall in the same upstairs bathroom, dark grey tile below and a white tub to the left
After: one of the two customer-supplied Kohlers, set and tested the same visit.

Duvall is one of the places we install toilets most. The rest of our 2026 Duvall toilet work, all inside the city:

  • In March, Bradyn found a downstairs toilet with a leaking flush valve and a noisy fill valve. The homeowner chose a replacement over a tank rebuild, and it got a Toto Drake and a new angle stop.
  • In May, Bradyn installed a customer-supplied bidet in one bathroom and a Toto Drake in another on the same visit.
  • In June, Mykal rebuilt a downstairs toilet whose tank-to-bowl bolts were leaking and corroded: tank off, new bolts, new flush valve and fill valve.
  • In September, PJ and Alexander replaced three roughly 30-year-old round-front toilets in another house with Toto Drakes.
  • In October and November, Beau replaced a Kohler with a Toto Drake, and reset a toilet on a new wax ring and closet bolts after its seal failed.

Two earlier Duvall jobs have their own stories: three new toilets in a Duvall house, with a five-star review, and the August pair on our toilet installation page.

What We Install in Duvall

New toilets we supply

Toto Drakes and American Standard Cadet Pros: elongated or round-front, standard or comfort height, 12-inch or 10-inch rough-in, each with a soft-close seat, wax ring, closet bolts and braided supply line.

Toilets and bidets you've bought

We set customer-supplied toilets and bidet units, as Donald did with the two Kohlers and Bradyn with the bidet in May. Tell us the model when you book.

Shutoffs while the water is off

Old multi-turn angle stops often will not close fully, or start dripping once they are moved. When a toilet job puts the water off anyway, swapping them for quarter-turn valves costs little and saves a fight with a stuck valve later.

Tank rebuilds and resets

When the bowl is sound, new bolts, a flush valve and a fill valve, or a fresh wax ring, can be the better answer, as in June and November.

Duvall-Specific Toilet Considerations

Soft Tolt water inside the city

Every drop the City of Duvall delivers comes from Seattle Public Utilities' Tolt River supply, and it is very soft: 1.39 grains per gallon in the city's 2022 water quality report. Scale rarely kills a toilet in town. Duvall toilets fail mechanically instead, at flappers, fill valves and corroded tank bolts, which is why a rebuild is often worth quoting next to a replacement.

Wells past the city's water service area

Outside the area the city serves, Duvall homes run on private wells, and well water can carry iron, manganese and fine sediment. Grit wears fill valve seals and stains bowls, and a toilet that fills slowly can be a pressure tank or sediment filter problem rather than a toilet problem. We check both before we blame the fill valve.

CPVC lines in the newer houses

A lot of Duvall's newer houses were plumbed in CPVC, and the stops behind the toilets are glued or threaded onto it. CPVC gets brittle with age and heat, so we change stops on it carefully and with the water off at the main, as in August, rather than wrenching on an old valve with the system live.

Older bathrooms with 10-inch rough-ins

Some Duvall bathrooms have the drain 10 inches from the wall instead of the usual 12. A standard toilet will not fit one. We measure before we order, which is how the August house ended up with two standard Drakes and one round-front model made for the shorter spacing.

City sewer in town, septic beyond it

Inside the city limits, toilets drain to the city's sewer. Out past them, most homes are on septic, and a toilet that backs up with a clear trap can be a full tank or a blocked line rather than the toilet. Our Duvall leak and drain pages and our well and septic guide cover that side.

Our Process

1. Look and measure

We check the toilet, the rough-in distance, the flange, the shutoff and the floor, and give you the price before any work starts.

2. Water off, old toilet out

At the shutoff, or at the main when the stops are coming out too. The old toilet is lifted off the flange and carried out.

3. Set the new one

New stops where they are needed, a new wax ring, closet bolts and supply line, the toilet set level and secured.

4. Test, caulk and haul away

We flush each toilet, check every connection for leaks, caulk the base after the test, and take the old toilets with us.

Frequently Asked Questions: Toilets in Duvall

How much does it cost to replace a toilet in Duvall?

On our 2026 Duvall invoices, replacing one toilet with a new Toto Drake we supply ran about $1,200 to $1,700 with tax, the higher end including a new angle stop. Three toilets in one visit, with three new quarter-turn stops, came to about $3,500 with tax, which works out cheaper per toilet than one at a time.

Setting toilets you have bought costs less: Donald's two customer-supplied Kohlers in May came to about $1,000 with tax for both.

Can you install a toilet I bought myself in Duvall?

Yes. We set customer-supplied toilets and bidet units on a new wax ring, closet bolts and supply line, test them and haul the old ones away. Two upstairs Kohlers in May and a bidet in another Duvall house the same month went in that way. Tell us the model when you book.

Why does my Duvall toilet keep running if the water is soft?

Because soft water stops scale, not wear. Duvall's Tolt supply is only about 1.39 grains per gallon, so mineral crust is rarely the cause. Flappers, fill valves and tank bolts simply wear out, and a corroded tank bolt can leak onto the floor. A rebuild or a new fill valve often fixes it in one visit.

What is a 10-inch rough-in, and does my Duvall bathroom have one?

It is the distance from the wall behind the toilet to the center of the drain. Most bathrooms measure 12 inches; some older ones measure 10, and a standard toilet will not fit. Measure from the wall, not the baseboard, to the closet bolts. We measure before ordering, as we did for the August house.

Should I replace the shutoff valve when I replace a toilet?

If it is an old multi-turn valve, usually yes. They stiffen, fail to close fully or start dripping once disturbed, and the water is already off for the toilet. On CPVC lines, common in Duvall's newer houses, we do it with the main off. August's three toilets all got new quarter-turn stops.

Serving Duvall from Fall City

Our shop is in Fall City, 25 to 30 minutes up the valley from Duvall, close enough for a running toilet or a leak at the base to be handled the day it is called in. We cover the rest of the valley the same way, in Carnation, Fall City and Snoqualmie.

More about our Duvall service area · Back to toilet installation

Why Duvall Homeowners Call Us About Toilets

We measure before we order

The rough-in, the flange and the shutoff get checked first, so the toilet that arrives is the one that fits.

We fix the shutoffs too

Old multi-turn stops come out while the water is off, so the next repair starts with a valve that works.

Supplied or yours, it's the same care

New wax ring, bolts and supply line, a leak test, then caulk, whoever bought the toilet.

Licensed, Bonded & Insured

Lighthouse Plumbing is a fully licensed, bonded and insured Washington plumbing contractor. Our license number is **LIGHTP*762K2**, and you're welcome to verify it with Washington State L&I before we start. More detail is on our licensing and insurance page.

425-549-2400Get Online Quote